Monthly Archives: January 2008

Vacuum Adapter

Posted on January 30, 2008 Filed Under Tools
Some lathes (like the Stubby) have cross drilled main shafts and this makes the use of vacuum adapters a challenge. I decided to make an adapter for my stubby this weekend. The adapter detailed below can be made from standard hardware store items, except for the double sealed bearing which you can get from Master [...]
Posted in Tools | Tagged Lathe, vacuum adapter, vacuum chuck, wood turning, woodturning | 1 Comment

Polymer Clay Segment & Inlay

Posted on January 22, 2008 Filed Under Uncategorized
Hairspray Over the holidays I experimented with a new turning material “Polymer Clay”. I was familiar with this materials use in crafts and I also saw a few pens made from it. Since that time I have been wanting to experiment with it for use as a substitute for finials, inlays and borders in turned pieces. Polymer [...]
Posted in Uncategorized | 4 Comments

The bowl goes to college

Posted on January 15, 2008 Filed Under Bowls
Session 9 movie download Hairspray move Sirène rouge, La move The bowl 25th Hour video that I turned this weekend is already in use in my daughters dorm. Start Slide Show with PicLens Lite
Posted in Bowls | Leave a comment

Travel Mug

Posted on January 13, 2008 Filed Under Instruments
The winter issue of American Woodturner featured the turning of a travel mug. I bought a mug insert some time ago from WoodCraft and it was sitting on my project bench waiting for motivation. Since I needed a Christmas gift for a friend and I wanted to try turning a staved vessel using [...]
Posted in Instruments | 9 Comments

Measuring Lathe Misalignment

Posted on January 13, 2008 Filed Under Tools
I noticed while turning this holiday that my tail and headstock were out of alignment. I noticed it while drilling a piece with a Jacobs Chuck in the tail stock. The bit seemed to struggle finding the center and that caused me to investigate. I don’t know what the formal technique for measuring this misalignment is [...]
Posted in Tools | 1 Comment

Stubby tailstock lift

Posted on January 9, 2008 Filed Under Tools
Over the holidays I updated and completed a number of jigs in my shop. Band saw fence Drill press fence Table saw sled But the most fun was the face lift that I did to my stubby! I’ll admit I went a bit crazy but hey it seems to work really well. These modifications require close alignment to the lathe, so [...]
Posted in Tools | 5 Comments

Happy New Year

Posted on January 8, 2008 Filed Under Collections
I haven’t posted since before Christmas so I bet you think I just kicked back and abandoned the shop. Not hardly, I have a gaggle of stuff to report on. I had three weeks of vacation so I spent time with the family and wore out the turned.out.right shop. Below is an inventory of stuff I [...]
Posted in Collections | Leave a comment
Copyright © - Turned.Out.Right Woodturning